Making of RC AIRCRAFT !

Well every one must had a dream to make a radio controllable aircraft by yourself and see it flying.
Here in this post am sharing the info i know about making of the RC AIRCRAFT in home.



WHAT IS RC STANDS FOR .?

Many readers might wonder what is the RC refers to, it is nothing but the radio controllable . 
We can control the aircraft with the controller in our hand , we can increase the speed and controll the directions it has to move. 

THIS IS RC AIRCRAFT.

What should be the essential components needed ?

1. Battery - powers the motor
2. Canopy - goes over the cockpit where the "pilot" would sit.
3. Cowl - This goes on the front of the airplane covering the motor unit
4. Engine/motor - turns the propellor
5. Fuselage - the main body of the aircraft
6. Landing gear - wheels for the plane to land, typically two in front and one at the rear
7. Propellor - turns and impels the aircraft forward
8. Recharger - charges up the battery
9. Spinner - the front nose of the propellor
10. Transmitter - The operator uses this to control the aircraft
11. Wings - gives the plane flight!

INTERNAL PARTS OF THE AIRCRAFT :

Friends if you have a idea of making a RC AIRCRAFT kindly refer to the site below it could help you a lot. For the stepwise guide i kindly recommend you all to buy the book at http://howtomakercairplanes.com/ . The author Carl Baer is excellent it costs a less amount of Rs.2000/- for the guide.

SOURCES:

www.stormthecastle.com

http://howtomakercairplanes.com/